How to Jump-Start a Car Using Jump Leads

Jump-starting a car with a flat battery is most effectively done using jump leads. Here's a step-by-step guide to help you through the process.

How to Jump-Start a Car Using Jump Leads:

Yes. Just like standard vehicles, a hybrid can be jump-started when the battery is discharged.

What You'll Need:

- A second vehicle with a fully charged battery: Avoid using hybrid or electric cars to prevent potential damage.
- A pair of high-quality jump leads.

Safety Precautions:

Consult the Owner's Manual: Review the manual for specific instructions and warnings.

Seek Professional Help if Unsure: If you're not confident, contact your local garage or Browning Suzuki for assistance.

Check for Damage: Ensure there’s no visible damage to the batteries or jump leads before proceeding.

Remove Metal Jewelry: Avoid wearing rings or any metal accessories that could touch the battery terminals.

Steps to Jump-Start a Car:

- Prepare the Vehicles: Turn off all electrical systems and devices in the vehicle with the dead battery (lights, radio, etc.). If possible, lower the driver’s window.
- Park the second vehicle close to the disabled vehicle, making sure the cars don’t touch and that the jump leads can reach both batteries comfortably.
- Turn Off Engines: Ensure both vehicles are off, the ignition keys are removed, and their bonnets (or boots, if the battery is located there) are open.
- Connect the Jump Leads: Red Lead (Positive):Attach one end of the red jump lead to the positive terminal of the flat battery (usually marked with a red cover and a plus (+) symbol).
- Connect the other end of the red jump lead to the positive terminal of the good battery in the second vehicle.
- Black Lead (Negative):Attach one end of the black jump lead to the negative terminal of the good battery.
- Connect the other end of the black jump lead to a solid, unpainted metal part of the engine on the disabled vehicle (a good earth point).
- Start the Vehicles: Attempt to start the vehicle with the flat battery. If it doesn’t start after a few attempts, there may be a more serious issue, and you should seek professional assistance.
- If the vehicle starts, let it run for about five minutes to charge the battery.

- Disconnect the Jump Leads: First, switch off both engines.
- Remove the black jump lead from the good earth point on the disabled vehicle.
- Disconnect the other end of the black jump lead from the second vehicle’s battery.
- Remove the red jump lead from the positive terminal of the second vehicle’s battery.
- Disconnect the other end of the red jump lead from the positive terminal of the flat battery.

After Removing the Jump Leads:

Restart the Engine: Start the engine of the previously disabled vehicle again.
Charge the Battery: The battery needs a full charge to be fully operational. Ideally, use a quality battery charger to charge it for several hours.

If possible, drive the vehicle for about 30 minutes at a moderate speed (avoid heavy traffic) to help recharge the battery further.

By following these steps carefully, you can safely jump-start your car and get back on the road.

However if your still unsure , we at Browning Suzuki are always happy to help any make or model car.